Nissan PCV Valve
Gases and vapors are the byproducts of your vehicle’s internal combustion process.
These elements are harmful substances that are mostly corrosive and that is dangerous
to both the engine and environment. As your vehicle operates, the internal combustion
chamber burns fuel for the air/fuel mixture. The burnt fuel or the exhaust gas
runs through different pipes in the exhaust system. But before it is released
out in the air, the crankcase also collects some of the gas which leaks past the
rings surrounding the pistons and containing them to the cylinder walls. If this
gas is left within the crankcase, the corrosive acids it carries along can damage
the engine. Hence, in your Nissan vehicle, a device called Nissan PCV Valve reroutes unburned crankcase gas into the intake manifold to be burned again.
Combustion gases are also called as “blow by” gases because the combustion process
blows them through the pistons. The blow by gases contain moisture, combustion
byproducts, and unburned fuel vapors. These elements are properly sealed within
the crankcase; however, vapors must be removed to avoid oil contamination. The
Nissan PCV Valve is part of the PCV system which has long been used to control emission. A hose
joins the valve into the intake manifold, while a second hose works with the air
cleaner and the crankcase so to provide fresh air to aid in removing vapor out.
Every Nissan vehicle has a particular specification of PCV valves, as its size
is significant in restricting the correct amount of air that is drawn out from
the crankcase and into the intake manifold.
If you need a Nissan PCV Valve, you are on the right place. Browse through our catalog for Nissan PCV Valves that are all of high quality. If you need assistance, you can try calling our
toll-free hotline where our skilled customer support personnel are on the line.
The acronym PCV stands for positive crankcase ventilation. They are usually
located right in plain sight on top of a valve cover. What does a Nissan PVC valve does for your Nissan vehicle? The Nissan PCV valve is responsible for maintaining
a constant pressure within the engine block by releasing oil fumes when they get
to a certain pressure and sending them into the fuel system to be re-combusted
with the gas.
The Nissan PVC valve is one of the emission control device installed in your
vehicle and probably one of the most beneficial. Nissan PVC valves route un-burn
crankcase exhaust gases back into the intake manifold where they can be combusted
again. Crankcase emissions are the number contributors of air pollution and
its constant recirculation of air helps in removing moisture which in turn causes
sludge to form. In this way, the Nissan PCV valve prolongs the life of the oil
and engine. it prevents condensation build up and burn fuel fumes that get by
the rings. Condensation build up create sludge causes the blockage of oil galleries
and return holes and if blocked it could lead to engine oil dry and it will get
fried later.
If the Nissan PVC valves were not designed then probably the pressure would
have went unchecked, it would blow out the seals and gaskets inside your engine.
In return to that simple task, the Nissan PCV valve also requires a little maintenance.
It is recommended that the valve and filter must be replaced somewhere around
30,000 to 50,000 miles as stated in the vehicle owners manual for service intervals.
Buy one from www.shopnisparts.com and have it in your glove box. replace it every
other year. Besides PVC valves are just sold cheap in the market.
Check out this Nissan Part:
|
|
 |
